Filter
Top Products
Chapter 2 Command Summary
Front Panel to SCPI Command Maps
Programming Guide 2-25
Table 2-2. HP 53131A/132A SCPI Command Summary
Keyword/Syntax Parameter Form Std/
New
Comments
:ABORt
Std Event; no query. Aborts measurement in progress.
:CALCulate[1]
:DATA?
:FEED
:IMMediate
:AUTO
:MATH
[:EXPRession]
:CATalog?
[:DEFine]?
:NAME | :SELect
:STATe
“[:]SENSe[1]”
<Boolean>
SCALE_OFFSET
<Boolean>
Std
Std
Std
Std
Std
Std
Std
New
New
New
Std
Subsystem. Performs post-acquisition math processing
(scale and offset) and data transfer on the data
acquired by a SENSe function.
Query only. Returns scaled/offset measurement result.
Sets the data flow to be fed into the CALCulate block.
Event or query; causes the Counter to recalculate
existing data without re-acquiring.
Enables/disables automatic post-processing.
Subtree.
Subtree.
Returns the name of the defined equation,
SCALE_OFFSET.
Returns the expression (equation) used for
math (scale/offset) processing.
Sets the name of selected math expression (equation).
Enables/disables math (scale/offset) processing.
Note that this setting must be enabled for any of the
other :CALC[1] settings to be used.
:CALCulate2
:FEED
:IMMediate
:AUTO
:LIMit
:CLEar
:AUTO
[:IMMediate]
:DISPlay
:FAIL?
“[:]CALCulate[1] ”
<Boolean>
<Boolean>
GRAPh | NUMBer
Std
Std
Std
Std
Std
Std
Std
Std
New
Std
Subsystem. Performs post-acquisition LIMit testing and
data transfer.
Sets the data flow to be fed into the CALCulate2 block.
Event; no query. Causes the Counter to recalculate
existing data without re-acquiring.
Enables/disables automatic post-processing.
Subtree. Collects together the commands associated
with controlling and getting reports from a single LIMit
test.
Subtree.
Enables the automatic clearing of limit test results.
Event; no query. Clears the limit test results.
Sets whether the measurement display is numeric or
symbolic (on a graph).
Query only. Returns a 0 or 1 to indicate if the last
tested measurement passed or failed the limit test.
0 = pass; 1 = fail.