Filter
Top Products
Viper Service Manual
Publication Number: 621360041TBSER - 6 - © 2010, IMI Cornelius Inc.
SYSTEM OVERVIEW
INTRODUCTION
The Viper unit consists of the following systems and hardware:
Multiple freeze barrels, each containing an internal scraper bar driven by an AC
motor.
A refrigeration system and an intelligent, hot gas defrost system.
The components are enclosed in a powder-coated steel frame to prevent corro-
sion. It is covered with ventilated cladding panels and a lighted merchandiser.
The cladding is easily removable to facilitate installation, service and mainte-
nance.
Each barrel has a transparent faceplate, with an integral relief valve and a
removable, self-closing dispensing valve mounted on the front. A removable drip
tray, with cup rest is located directly below the dispensing valves.
A programmable control system with a control panel that controls operational
and diagnostic functions and settings is located behind the merchandiser.