Filter
Top Products
Viper Service Manual
© 2010, IMI Cornelius Inc. - 27 - Publication Number: 621360041TBSER
Setting the Temperature
Format
The temperature format displayed by the unit may be set to either Centigrade or
Farenheit. Press the °F button to display readings in Farenheit and press the °C
button to display readings in Centigrade.
Setting the Date Format
The date format can be displayed in either United States or European format. To
display U.S. date format, press the USA button. This displays the date in mm/dd/
yy format. Press the EURO button to display the date in dd/mm/yy format.
Setting the Time Format
Time format can be displayed in either 12 or 24 hour format. To display the clock
settings in 12 hour format (1:08 P), press the 12 HR button. To display settings
in 24 hour format (23:05), press the 24 HR button.
Setting the POS Light-
ing
POS Lighting is controlled by the POS LIGHTING field on the Option Setup
menu (Figure 19). To turn off the merchandiser lighting, press the OFF button
while the POS LIGHTING field is highlighted. To turn on the merchandiser
lighting permanently, press the ALWAYS button. To turn the merchandiser
lighting on and off with the Sleep settings, press the SLEEP button.
Setting the Type of
Syrup
Syrup type for each barrel may be selected by highlighting the desired barrel
and pressing the appropriate button, FCB, FCB-L, FUB or FUB-L. FCB is for
Frozen Carbonated Beverage, FCB-L is for Frozen Carbonated Beverages -
Light (diet), FUB is for Frozen Uncarbonated Beverages and FUB-L is for Fro-
zen Uncarbonated Beverages - Light (diet). Each of these settings provides the
proper viscosity and temperature settings for the type of syrup being used.
Barrel Maintenance
Refer to the next section “Barrel Maintenance Menu” to perform barrel mainte-
nance on the system.
Maintenance Menu
The Maintenance menu, shown in Figure 20, is only available to service person-
nel or other authorized users, if security is enabled.