Filter
Top Products
Viper Service Manual
Publication Number: 621360041TBSER - 26 - © 2010, IMI Cornelius Inc.
To set all barrels in the system to the same duration setting, perform Steps 1
through 4 in Table 19 and then press the ALL button at the bottom of the display
while highlighting the duration setting you desire for all the barrels. When the
duration settings are complete, press the BACK button to save the settings and
return to the Select menu, shown in Figure 13.
Option Setup Menu
The Option Setup menu allows the user to set the various options available in
the system. These options are listed in Table 20. The Option Setup menu is
shown in Figure 19.
The functions of the display buttons change, depending on the highlighted
selection on the Option Setup screen. Refer to Table 20 for a listing of the button
functions for the various field selections.
Figure 19. Option Setup Screen
When all the options are set to the desired settings for the unit, press the BACK
button to store these settings and return to the Select menu, shown in Figure 13.
Table 19
Step Action Procedure
1
Set CO2 Pulse valve dura-
tion
From the Setup screen (Figure 13), select the CO2
Setup screen, shown in Figure 18.
2
Select barrel Use the Up and Down arrows to highlight the desired
barrel.
3
Select duration field Use Left and Right arrows to select duration field
4
Set duration Use the + or - buttons at the bottom of the display to
set the desired duration.
5
Select barrel Repeat Steps 2 through 4 for all barrels.
Table 20
Option Button 2 Button 3 Button 4 Button 5
Temp Format
°F °C
Date Format USA EURO
Time Format 12 HR 24 HR
POS Lighting OFF ALWAYS SLEEP
#1 SYRUP TYPE FCB FCB-L FUB FUB-L
#X SYRUP TYPE FCB FCB-L FUB FUB-L
OPTION
SETUP
12:51P
MAR 04
BACK
o
F
o
C
#1 SYRUP TYPE: FCB
TEMP FORMAT
o
F
DATE FORMAT USA
TIME FORMAT 12 HR
POS LIGHTING ALWAYS
#2 SYRUP TYPE: FCB