Filter
Top Products
Viper Service Manual
Publication Number: 621360041TBSER - 42 - © 2010, IMI Cornelius Inc.
PREVENTATIVE MAINTENANCE
SUMMARY
There are no daily maintenance procedures required on the Viper unit other than
normal cleanup of spills or overspray and emptying the drip tray. Normal equip-
ment maintenance intervals are listed in Table 33. It is recommended that a pre-
ventative maintenance procedure be performed every six (6) months. This
procedure should include all of the maintenance items described in Table 33 and
the following sections.
!
CAUTION:
Only trained and certified electrical, plumbing and refrigeration technicians
should service this unit. ALL WIRING AND PLUMBING MUST CONFORM TO
NATIONAL AND LOCAL CODES.
Table 33
Preventative Maintenance Summary
Maintenance Procedure Frequency of Maintenance
Clean Air Filter Monthly or more often, as necessary (See
Table 34)
Check BRIX Every six months or when changing syrup
types (See “BRIX Setup Menu” on page 32.)
Seal Change Every six months
Clean Condenser Coil Every six months or as necessary
Sanitize Unit Every six months or when changing syrup
types
Check Water Filter Every six months or if water pressure in the
system is low.
Change or Rotate Scraper Blades Every six months
Check for Leaks Every six months
Clean BIB Connectors & check opera-
tion of syrup sold out switches
Every six months or when changing syrup
types.
Check Clock Setting Every six months or when changing to or
from daylight savings time
Change caged o-ring on models w/
Motorman Valves.
Every six months or when changing syrup
types.