Filter
Top Products
Viper Service Manual
Publication Number: 621360041TBSER - 28 - © 2010, IMI Cornelius Inc.
The Maintenance menu is used for barrel maintenance, diagnostics, BRIX setup
and system information. It allows the technician access to the unit during peri-
odic maintenance or troubleshooting problems. It sometimes overrides the nor-
mal inputs from the system in order to perform this task.
Figure 20. Select Screen
Barrel Maintenance
Menu
The Barrel Maintenance menu, shown in Figure 21, allows the service techni-
cian to clean, rinse and sanitize the system on a barrel by barrel basis. The bar-
rel must be OFF in order to perform the barrel maintenance functions. As a
warning to the technician, the “Do Not Drink” status indicators are illuminated on
the barrels when entering the Barrel Maintenance menu.
The procedure for purging a barrel is shown in Table 21. The procedure for filling a bar-
rel is shown in Table 22. The procedure for running the scraper blade only on a barrel is
shown in Table 23 and the procedure for waking up a barrel is shown in Table 25.
Figure 21. Barrel Maintenance Screen
Purging a Barrel
SELECT
12:51P
MAR 04
BARREL MAINT
MANUAL DIAG
TOTALS
BRIX SETUP
MOTOR SETUP
SYSTEM
BACK MAIN SETUP MAINT GO
BARREL
MAINT
12:51P
MAR 04
#1 PURGE
#2 OFF
BACK PURGE FILL SPIN
Table 21
Step Action Procedure
1 Purge a barrel From the Select menu (Figure 20), open the Barrel
Maintenance menu, shown in Figure 21.
2 Select the barrel Use the Up and Down arrows to highlight the desired
barrel
3 Select Purge function Press the PURGE button at the bottom of the display
to select purge for the highlighted barrel