Filter
Top Products
English
13
ķrĸ
Care and Cleaning
3. Wash the blender jar, blade
assembly and jar collar in the
dishwasher, or by hand in warm,
sudsy water. If washing by hand, be
sure to rinse and wipe the parts dry.
The lid is NOT dishwasher-safe!
CLEANING THE BASE AND CORD
1. Wipe the blender base with a warm,
sudsy cloth; then wipe the base
clean with a damp cloth and dry
with a soft cloth. Do not use abrasive
cleansers or scouring pads.
NOTE: Do not immerse base in water.
2. Wipe the cord with a warm, sudsy
cloth; then wipe the cord clean with
a damp cloth and dry with a soft
cloth. The cord can be coiled into
the storage area on the bottom of the
blender base.
NOTE: Always correctly assemble the
clean blender parts before storing on
the blender base.
NOTE: Do not immerse base in water.
CLEANING THE BLENDER JAR
For a light cleaning:
Operate the blender for 30 seconds
with the jar filled with hot, soapy
water. Remove the jar from the base,
dispense the contents, and rinse the
jar and lid with clean water. Wipe
the jar and lid dry. The jar can also
be washed in a dishwasher.
For a thorough cleaning:
1. Turn the blender jar upside down
and remove the collar by turning it
counter-clockwise.
2. Lift the blade assembly from the jar
(the assembly cannot be completely
removed from the jar) and create a
space between the bottom flange of
the blade assembly and the ring
gasket by pulling the ring gasket
away from the flange. This will
permit a thorough cleaning of the
ring gasket.
32
24
16
8
C
u
p
s
4
3
2
1
40
5