Filter
Top Products
4 SYSTEM CONFIGURATION
4.5 Rules of System Configuration and Examples of Reconfiguration
53
4
4.5 Rules of System Configuration and Examples of
Reconfiguration
The rules of system configuration are explained below referring to a sample system configuration using an expansion board,
expansion adapter, I/O module, and intelligent function module.
System configuration example
The following system configuration is under consideration.
Check of limitation on the number of modules
Check if the sample system configuration is within the connectable-module range.
■Number of connected expansion boards
(Page 41 Number of connected expansion boards)
■Number of connected expansion adapters
(Page 41 Number of connected expansion adapters)
■Number of connected extension modules
• Number of modules connected on whole system
(Page 42 Overall system limitation)
Type No. of modules used Limitations Judgment
Expansion board 1 Only 1 OK
Type No. of modules used Limitations Judgment
Expansion adapter (Communication) 2 Up to 2 OK
Type No. of modules used Limitations Judgment
Extension module 11 Up to 16
(Extension power supply modules are excluded.)
OK
Extension power supply module Not used Up to 2 OK
Bus conversion module 1 Only 1 OK
FX5U-32MR/ES
FX5-16EYR/ES
FX5-16EYT/ES
FX5-16EX/ES
FX5-232ADP
FX5-232-BD
FX5-485ADP
FX5-CNV-BUS
FX5-40SSC-S
FX3U-1PG
FX3U-4AD
FX3U-128ASL-M
FX3U-4LC
FX3U-64CCL
CC-Link
FX5-16EYT/ES
To CC-Link
master station
The number of transmission points
setting for AnyWireASLINK
64 points
Remote I/O
station
Remote I/O
station
Remote I/O
station