Filter
Top Products
5 INSTALLATION
5.4 Procedures for Installing Directly (with M4 Screws)
67
5
5.4 Procedures for Installing Directly (with M4 Screws)
The product can be installed directly in the enclosure (with screws).
Position the holes so that there is a gap of about 2 mm (0.08") between the products.
Hole pitches for direct mounting
The product mounting hole pitches are shown below.
For pitch that varies depending on the product, refer to the table.
CPU module
Expansion adapter
Dimensions Model name Mounting hole pitch W
Unit: mm (inches)
FX5U-32MR/ES
FX5U-32MT/ES
FX5U-32MT/ESS
123 (4.85")
FX5U-64MR/ES
FX5U-64MT/ES
FX5U-64MT/ESS
193 (7.6")
FX5U-80MR/ES
FX5U-80MT/ES
FX5U-80MT/ESS
258 (10.16")
Dimensions Model name Mounting hole pitch W
Unit: mm (inches)
FX5-232ADP
FX5-485ADP
FX5-4AD-ADP
FX5-4DA-ADP
15.1 (0.6
")
W
22
(0.87")
A
5 (0.2")
80 (3.15")
90 (3.55")
W
22
(0.87")
B
5 (0.2")
80 (3.15")
90 (3.55")
5
C
98 (3.86")
W4 (0.16")
106 (4.18")