Filter
Top Products
19
Mod el 5454 Operat ing Procedures
Insert the prime plug into the hole at the top of the
freezer door and push down.
Figure 13
Step 4
Installthefreezerdoor . Position the freezer door onthe
four studs on the front of the freezing cylinder. Install
the handscr ews. T ighten them equally in a criss-cross
pattern to insure that the door is snug.
Figure 14
Step 5
Install the draw valves. Slide the three o-rings into the
grooves on each draw valv e and lubricate the v alve
where indicated in the illustr ation below.
Figure 15
Lubricate t he inside of the freezer door spouts (top and
bottom).Insert each draw valve from thebottom ofthe
door, until the slot in the draw v alve comes into view.
Figure 16