Filter
Top Products
20
Operat ing Procedures Mod el 5454
Step 6
Install the draw handles. Slide the o-r ing into th e
groove on the pivot pin and lubricate the pin as
illustrated below.
Figure 17
Slide the fork of the draw handle in the right side of the
draw valve slot. Slide the pivot pin through each draw
handle as you insert them into the draw valves.
Figure 18
Note: Match the color coded buttons on the draw
handles to the color coded buttons above the door on
the freezer.
Step 7
Install the spinner blades. Lubricate the shafts of the
spinner blades.
Figure 19
Insert the s pinner blades from the bottom of the door
into the center of the draw valves until the shaft
appears a t the top o f the draw v alve.
Figure 20
Slip the spinner coupling over the slotted end of the
spinner shaft. Raise the slip collar on the coupling and
turn the shaft from the bottom, until the spinner
coupling slips down intoitslocking position.Not e: The
spinner blade will be correctly installed when the blade
is flush with the bottom o f the door s pout.