Filter
Top Products
27
Mod el 5454 Operat ing Procedures
Priming
Step 1
Sanitize the mix tank, mix tank cover , mix probe and
funnel. Place the mix tank andcover in the mix cabinet.
Step 2
Insert the mix probe prongs inside the mix tank, and
connect the mix probe to the socket receptacle.
Figure 46
Step 3
Place the free end of the suction line i n the m ix tank.
Figure 47
Step 4
Install the funnel. Fill the tank with FRESH mix and
close the mix cabinet door.
Figure 48
Note: Use only FRESH mix when priming the
freezer .
Step 5
Place an empty mix pail beneath the door spouts and
open the draw valves. With the prime plug still in the
UP position, press the PUMP keypad. This will allow
the mix to bepumped through the freezing cylinderand
force out any remaining sanit izing solution. When full
strength mix is flowing fr om the door spouts , close the
draw v alves.
Figure 49