Filter
Top Products
41
Mod el 5454 Troubleshooting Guide
PROBLEM PROBABLE CAUSE REMEDY PAGE
REF.
10. There is excessive
mix l eakage into the
rear drip tray.
a. The seal on the drive shaft is
either worn or m issing.
a. Install the drive shaft s eal.
Replace r ubber parts every 3
months.
44
b. There is improper lubrication
on the drive shaft.
b. Lubricate the drive shaft
properly.
17
c. The rear shell bearing i s worn. c. Call a service technician to
replace the rear shell bearing.
--
d. The gear box is out of
alignment.
d. Call a service technician to
align the gear box.
--
e. The drive shaft and beater
assembly is working forward.
e. Call a service technician to
correct the problem.
--
11 . The drive shaft is
stuck i n the gear box
coupling.
a. There is lubrication on the end
of the drive shaft.
a. Do not lubricate the end of the
shaft. Call a service technician
for removal.
--
b. There are rounded corners on
the shaft, gear coupling, or
both.
b. Call a service technician to
replace the gear c oupling,
drive shaft or both.
--
12. The fr eezing cylinder
walls ar e sc ored.
a. There are broken pins on the
beater assembly.
a. Repair or replac e the beater
assembly. Be sure the scraper
blades ar e proper ly seated on
the pins.
--
b. The gear box is out of
alignment.
b. Call a service technician to
align the gear box.
--
c. The beater assembly is bent. c . The beater assembly must be
replaced. Call a service
technician to correct t he
cause o f the bent beater.
--
d. The front bearing is missing. d. Install the front bearing on the
back o f the freezer door.
18
13. The spinner shaft will
not rotate to blend the
syrup and mix.
a. The flexible coupling is
broken.
a. Call a service technician to
replace the flexible coupling.
--
b. The pin is missing on the
quick disconnect of the
spinner coupling.
b. Call a service technician to
replace the spinner coupling.
--
c. The spinner motor i s out on
thermal overload.
c. Allow the spinner motor to
cool. Check the lubrication on
the spinner shaft . Lubricat e
the spinner shaft properly.
20