Filter
Top Products
©2001 Maytag Appliances Sales Company
2-11
16010486 (16008373-05)
Revised 02/01
Section 2. Washer Controls Overview
NOTE: Due to the various differences
in the two washer control systems, the
following pages will focus first on the
LED washer then the LCD washer.
The Help and Diagnostic code lists are
stored in separate permanent memories
with a maximum of nine codes per list.
LED WASHER:
Accessing Service Mode:
Pressing down the delicates and heavy soil
keys for 3 seconds places the machine in
the service mode.
SPECIAL TESTS
The following table lists the various tests
available while in the Service Mode, which
can be accessed by pressing the following
keys:
SERVICE MODE TABLE
LED Washer:
syeKsserPnoitcnuF/tseTlaicepS
lamroNeuqroTrotoMswohS
eerFelknirWkcehCdaPenarbmeM
kciuQtseTnwoDemiTtsaF
nipStseTnipSkciuQ
lioSthgiL
noisiveRerawtfoSsyalpsiD
rebmuN
setacileDelcyCecivreSkciuQ
esniRtseTtuptuOdraoB
elcyCniatSsedoCpleH
kaoserPsedoCcitsongaiD
hsaWdnaHstseTtupnIdraoB
Membrane Pad Check
While in service mode, pressing the
wrinkle free key will start a membrane
pad switch check.
The membrane check involves turning all
the embedded LED on the membrane
pad off except for the wrinkle free key. All
the LEDs can be toggled by pressing the
key associated with the LED.
At any point, if there are 5 seconds of
inactivity, then this test will exit without
any display.
The off key must be pressed twice within
30 seconds in order to cancel this test.
FAST TIME DOWN TEST
While in service mode, the pressing of
quick key will advance the program to
the next portion of the wash cycle. (Refer
to page 1-2)
QUICK SPIN TEST
While in service mode, the pressing of
spin key shall start the washer in the
quick spin mode.