Filter
Top Products
©2000 Maytag Appliances Sales Company
16010199 (16008373-03)
Revised 7/00
11
Figure 8-5
Figure 8-6
6. To remove the pump from the mount-
ing bracket, pull down on the mount-
ing tabs and slide the pump off the
mounting bracket. (See Figure 8-6)
DETERGENT HOSE
The detergent hose leads from the recir-
culation pump up the rear of the washer
cabinet and leads to the top of the outer
tub assembly. The hose provides a path
for the water to recirculate from the lower
part of the outer tub assembly to the
enter on top of the outer tub assembly.
Note: Small indicator marks are painted
on the hose to locate and properly posi-
tion the metal mounting clips onto the
hose.
Removal
1. Disconnect power and water to the
washer.
2. Remove the detergent hose from the
recirculation pump.
NOTE: Indicator mark on hose for
reinstallation.
Figure 8-7
INDICATOR
MARK
DETERGENT HOSE
RECIRCULATION PUMP