Filter
Top Products
© 1998 Maytag Corporation
16008373-01 SECTION 4. CONSOLE
4-24-2
4-24-2
4-2
REMOVALREMOVAL
REMOVALREMOVAL
REMOVAL
Depress the tab at the top of the switch with
a screwdriver to disengage the tab from the
console. Pivot the switch away from the
console to remove
(Figure 4-5)(Figure 4-5)
(Figure 4-5)(Figure 4-5)
(Figure 4-5).
REPLACEMENTREPLACEMENT
REPLACEMENTREPLACEMENT
REPLACEMENT
Align the rib on the bottom of the switch with
the slot in the console. Pivot the switch up
into the console until the tab engages the
console securely. Check that the locating tabs
on either side of the switch's lower alignment
rib are in position to properly center and lock
the switch into the lower part of the switch
opening.
VERTICAL SWITCHESVERTICAL SWITCHES
VERTICAL SWITCHESVERTICAL SWITCHES
VERTICAL SWITCHES
(Push Button)(Push Button)
(Push Button)(Push Button)
(Push Button)
HORIZONTAL SWITCHESHORIZONTAL SWITCHES
HORIZONTAL SWITCHESHORIZONTAL SWITCHES
HORIZONTAL SWITCHES
(Push-to-Start)(Push-to-Start)
(Push-to-Start)(Push-to-Start)
(Push-to-Start)
Locking Tab
Locking Tab
Locking Tab
Screwdriver
Locking Tab
Carefully DepressCarefully Depress
Carefully DepressCarefully Depress
Carefully Depress
Locking Tab onLocking Tab on
Locking Tab onLocking Tab on
Locking Tab on
Switch to DisengageSwitch to Disengage
Switch to DisengageSwitch to Disengage
Switch to Disengage
From ConsoleFrom Console
From ConsoleFrom Console
From Console
Figure 4-6Figure 4-6
Figure 4-6Figure 4-6
Figure 4-6
Figure 4-5Figure 4-5
Figure 4-5Figure 4-5
Figure 4-5
Align the Center RibAlign the Center Rib
Align the Center RibAlign the Center Rib
Align the Center Rib
on the bottom of theon the bottom of the
on the bottom of theon the bottom of the
on the bottom of the
Switch with the Slot inSwitch with the Slot in
Switch with the Slot inSwitch with the Slot in
Switch with the Slot in
the Cup on the Bottomthe Cup on the Bottom
the Cup on the Bottomthe Cup on the Bottom
the Cup on the Bottom
of the Switch Openingof the Switch Opening
of the Switch Openingof the Switch Opening
of the Switch Opening
on the Consoleon the Console
on the Consoleon the Console
on the Console
Pivoting thePivoting the
Pivoting thePivoting the
Pivoting the
Switch Body, LockSwitch Body, Lock
Switch Body, LockSwitch Body, Lock
Switch Body, Lock
it in at the Top ofit in at the Top of
it in at the Top ofit in at the Top of
it in at the Top of
the Openingthe Opening
the Openingthe Opening
the Opening
on the Console.on the Console.
on the Console.on the Console.
on the Console.
REMOVALREMOVAL
REMOVALREMOVAL
REMOVAL
Depress the locking tab on the switch to
disengage it from the locking tab on the
console. Pivot the switch from the console
(Figure 4-6).(Figure 4-6).
(Figure 4-6).(Figure 4-6).
(Figure 4-6).
REPLACEMENTREPLACEMENT
REPLACEMENTREPLACEMENT
REPLACEMENT
Position one side into the console and pivot
the other tab into the console and apply enough
pressure to engage the tab into the console.