Filter
Top Products
5-1
16010486 (16008373-05)
Revised 10/00
Section 5. Teardown & Wiring Information
©2001 Maytag Appliances Sales Company
SECTION 5. TEARDOWN & WIRING INFORMATION
Warning - Always shut off
electrical power to the unit
before beginning any ser-
vice repair procedures.
The replacement console assembly consists
of the console, medallion and membrane
pad.
CONSOLE REMOVAL
1. Disconnect power to the unit.
2. Remove the four screws securing the
console to the rear cover plate.
Figure 5-1
3. Lay a drop cloth across the top cover
of the washer.
4. Grasp the top of the console and
gently rock the top of the console
forward away from the rear console
back. Note the hooked tabs on bottom
of the console, which engage the slots
in the top cover.
Figure 5-2
MICROPROCESSOR BOARD REMOVAL
1. Disconnect power to the washer.
2. Remove the console assembly.
3. Carefully remove the membrane pad
harness and other wires from the mi-
croprocessor board.
Figure 5-3
LCD MODEL
Figure 5-4
LED MODEL
5. For reinstallation, reverse the aforemen-
tioned steps.