Whirlpool MAH3000 Dishwasher User Manual


 
©2000 Maytag Appliances Sales Company
16010199 (16008373-03)
Revised 7/00
6
Stain Cycle:
General overview of Stain Cycle:
1) Tumble in the normal tumble pattern until it has completed filling
plus 3 minutes.
2) Tumble for an additional 15 minutes with a 6T/24P tumble pattern.
3) Return to selected tumble pattern and proceed with remainder of the
wash time preselected.
4) Bleach fill and first rinse fill temperature will be the same as the wash fill
temperature.
5) Rinse times (including fills) are now 5-1/2 minutes, 4 minutes, 4
minutes and 4-1/2 minutes.
6) The fourth rinse is forced, which would be warm if warm rinse selected.
(Colors will not default to cold on the 4th rinse.)
The following is an example of a Stain Cycle:
.detcelestonesniRartxE,remitnodetceleselcyCniatS,dloC/mraW,setihW
elcyC
noitcnuF
hctiwSnoitpOelcyCniatS
"detcelestoN"
hctiwSnoitpOelcyCniatS
"detceleS"
hsaW/lliF
emiTlliF
P3/T7@setuniM02
dnoces3=P3,elbmutdnoces7=T7(
)esuap
emiTlliF
P3/T7@setuniM3
P42/T6@setuniM51
P3/T7@setuniM71
/hcaelB
elbmuT
setuniM2setuniM2
esniRts1 elbmuT&lliFsetuniM2elbmuT&lliFsetuniM2/1-5
esniRdn2 elbmuT&lliFsetuniM2elbmuT&lliFsetuniM4
esniRdr3 elbmuT&lliFsetuniM2/1-2elbmuT&lliFsetuniM4
esniRht4 elbmuT&lliFsetuniM2/1-4
nipSlaniF setuniM2/1-6setuniM2/1-6
nuRlatoT
:emiT
__________
_________
setuniM64setuniM47
Suds detection during stain cycle:
1. Torque baseline is set during the first 3 minutes of Wash cycle after the washer is
filled.
2. Suds detection is frozen during 15 minutes of the 6/24 tumble action during Wash/
Fill cycle.
3. Suds detection begins when cycle resumes the initial selected tumble pattern .