Filter
Top Products
©2000 Maytag Appliances Sales Company
16010199 (16008373-03)
Revised 7/00
12
3. Locate the rear mounting clip on the
detergent hose in the access panel
opening and slide the clip off the
cabinet flange. (See Figure 8-8)
Note: When reinstalling clip to
cabinet ensure the clip is approxi-
mately 1 inch up from the inside
corner of the access opening to
prevent kinking of the hose.
4. Follow the detergent hose vertically up
to the air dome hose mounting bracket.
The detergent hose is tucked behind
the air dome hose. (See Figure 8-9)
Figure 8-8
Figure 8-9
Figure 8-10
Figure 8-11
5. The detergent hose then goes verti-
cally to the upper right rear flange of
the cabinet and is retained by two
metal clips. Indicators are on the hose
showing the proper positioning of the
clips on the hose.
NOTE: The upper left clip should be
positioned directly above the top air
dome hose retainer.
(See Figure 8-11 & 8-12)
6. The detergent hose turns 90 degrees
toward the front of the washer and
passes through the saddle horn on the
top of the outer tub. Unsnap the hose
from the saddle horn.
(See Figure 8-12)