Filter
Top Products
©2001 Maytag Appliances Sales Company
2-15
16010486 (16008373-05)
Revised 02/01
Section 2. Washer Controls Overview
ACCESSING SERVICE MODE
LCD WASHER:
Press and hold the back and help keys for
5 seconds to enter the Service Mode.
Pressing the Service Mode keys again,
will take the machine out of the Service
Mode.
The following screen will appear on the
touch screen.
The Service Mode screen lists four
different touch panels; service tests, RPM/
torque, unbalance diagnostic codes and
exit service mode. Pressing any of the
touch screens will activate a different
screen dedicated to that function, except
RPM/torque.
If the washer is in operation when the
service mode is activated, the current
spinner RPM, torque and unbalance will
be listed.
The diagnostic codes listed are the last
four codes assigned by the washer.
Service Mode
diagnostic codes
1...
2...
3...
4...
exit service mode
service test
####RPM
####torque
unbalance
system check
Service Tests
user interface test
quick spin test
system check
service cycle
advance to
next step
exit service
tests
User Interface
Test
exit user
interface test
Touch the four corners and center of the touch
screen in any order.
center
lower
left
lower
right
upper
left
upper
right
Service Tests
The service tests are identical to the LED
washer, except instead of pressing LED
keys, the technician can touch any of the
screens on the washer control panel to
initiate.
User Interface Tests
This will check the touch screen. The
service technician is prompted to Touch
the four corners and center of the touch
screen in any order." When each area is
pressed, the button display will reverse
image. If all areas are sensed, the control
will display Touch screen test passed." If
any area(s) is not sensed within 10
seconds, the technician will be prompted
to Touch the area(s) not highlighted." If
the area can still not be sensed within 10
seconds, the control will display Touch