©2000 Maytag Appliances Sales Company
16010199 (16008373-03)
Revised 7/00
4
A new Stain Cycle and revised tumble patterns were introduced and will be described
in the following pages.
At series 11 the timer was changed, wire harness revised and the schematic was
changed. The timer cams were changed in the timer, the wire harness changed to pull
wires out of the timer connector and the pump is now in series with the pressure
switch, also an extra wire was jumpered across the pressure switch. Now the recircu-
lating pump is controlled through the pressure switch (Figure 4-2). This was done to
force the washer to fill with water prior to starting the recirculation pump.
SECTION 5. CYCLE REVIEW
Cycles on the Fabrics switch now list the cycles according to how clothes are
sorted. This simiplifies how to select the cycles in doing the wash. A new
Stain Cycle was added to the Option Switch which adds cycle wash time, vari-
ous tumble patterns and an additional rinse with longer tumble times during the
rinse. (See Figure 5-1)
Figure 5-1