Filter
Top Products
YORK INTERNATIONAL
90
FORM 160.55-O1 (604)
CUSTOM VIEW SETUP
OVERVIEW
(Flash memory Card version C.MLM.02.01 or later)
This screen allows the Service technician to select up to
10 parameters for display on the Custom View Screen.
Requires a login ac cess level of SER-
VICE. Ser vice Technicians refer to
YORK Ser vice Manual 160.55-M1
for operation in struc tions and ex pla -
na tion of all programmable setpoints
and dis played values.
DISPLAY ONLY
Slot Numbers
Lists the available parameters that can be displayed.
The desired parameters for display are selected from
this list.
PROGRAMMABLE
Page Up
Scroll up through list of available parameters.
Page Down
Scroll down through list of available parameters.
Select
First use the Page Up and Page Down keys to scroll
through the Slot Numbers list and note the number of
the parameter(s) to be displayed. Pressing the Select key
places a green colored selection box around Cus tom Slot
1. If it is desired to change an already entered pa ram e ter,
use the 5 and 6 keys to place the selection box around
the slot number to be changed. With the se lec tion box
around the slot number to be changed or en tered, press
the ENTER (!) key. A dialog box is dis played permit-
ting data entry. Using the numeric key pad keys, enter the
desired slot num ber and press the EN TER (!) key.
Custom Slot (1-10)
Use the Select key and numeric keypad keys as de scribed
above and enter the slot number from Slot Num bers
list. Setting the Slot number to zero clears the dis play
of this slot number.
Clear Display
Pressing this key clears all selected parameters from the
Custom View screen.
NAVIGATION
Home
Access Level Required: VIEW
Causes a return to the Home Screen.
Custom View
Access Level Required: SERVICE
Causes a return to the Custom View Screen.
FIG. 42
00376VIP
OptiView Control Center