A SERVICE OF

logo

128 GL-1010 Administrator’s Guide
Either type the Advertising Print Server name, or choose
Search to automatically locate print server information and
choose a device name from the drop-down list.
Once a server is selected, the remaining fields are populated
with the associated data. Click the
Manual Configuration
checkbox to add or edit the default data.
Click
Finish. You will be asked to confirm your choice. Click
Yes to continue. When the update is complete, you can
proceed to the driver selection section (see page 130). Make
sure to configure the GL-1010 as a Network Printer (refer to
Network Printer Mode on page 116).