144 GL-1010 Administrator’s Guide
SETTING UP APPLETALK PRINTING
Considerations and Limitations
n The GL-1010 supports Macintosh printing over EtherTalk
only. TokenTalk is not currently supported.
n Magazine sorting and saddle stitching features are not
supported.
n Printing Microsoft Word documents that contain multiple
section breaks is not supported. The output stacking order
will be incorrect and if stapling is enabled, each section will
be stapled individually.
Prerequisites
n Macintosh
M Operating System version 8.0, 8.5, 8.6, 9.0 or OS X
M LaserWriter 8 printer driver
n Token Ring NIC cannot be installed in the GL-1010
controller.
n You can enable Macintosh printing remotely, by using
TopAccess on the administrator’s workstation, or locally,
using the copier’s LCD Touch Screen.
AppleTalk Setup
Set Protocol
1 Launch your Web browser and enter the IP address of the
GL-1010 you want to configure to access the embedded Web
site, TopAccess. (Refer to
Opening TopAccess on page 64.)
If you do not know the IP address, you can find it by using
GL DocMon (see the GL-1010 Operator’s Guide (Basic) for
details).
2 Click the Login link and enter the administrative username
and password.
3 Click the Administration tab.
4 Click the Setup submenu.
