22 GL-1010 Administrator’s Guide
Configuring IPX/SPX Protocol Settings
1 From the Network Setting menu, press IPX/SPX to display the
IPX/SPX Setting screen:
2 If you are running a TCP/IP-only network, press DISABLE.
Otherwise, click
ENABLE to ok or modify the IPX/SPX frame
type.
3 Select the frame type from the options shown.
By default, the frame type is set to
AUTO. With the Auto Sense
option enabled, the GL-1010 inspects network traffic in the
attempt to determine the appropriate frame type. While this
makes frame type discovery automatic, it can also cause
network congestion.
4 Press OK to save the changes for the duration of the session.
NOTE:
The IPX/SPX Settings
screen shown here displays
the Ethernet NIC settings.
The screen varies slightly if
you have a Token Ring NIC
installed.
