GL-1010 Administrator’s Guide 19
Configuring TCP/IP Protocol Settings
1 From the Network Setting menu, press the TCP/IP soft key.
The
TCP/IP Setting screen is displayed:
2 By default, the IP Address acquisition mode is DHCP. So, if
you are entering this screen for the first time, the
IP ADDRESS,
SUBNET, and GATEWAY fields are not editable. Press the field
to give it focus and then edit the value using the control
panel’s numeric keypad.
3 Enter the IP Address, Subnet Mask, and Gateway using the
copier’s numeric keypad.
4 Press OK. If you want to view or modify the WINS server IP
addresses, press the
PAGE DOWN softkey. Proceed to Setting Up
WINS and DNS Servers
on page 20. Otherwise, press OK to save
the changes for the duration of the session.
Press the PAGE DOWN (double-
arrow) soft key to access the WINS
Server setup screen.
