142 GL-1010 Administrator’s Guide
Deleting a Print Queue
1 Log on to the root account.
2 Enter the following command:
gl1010rm <queue name>
This command uses the system’s lpadmin command to
delete the print queue and configuration file.
Change the Default Values of a Print Queue
1 Study the interface file, named <queue name>, which is
stored in the
/etc/lp/interfaces directory. This file
contains all of the default settings and values that can be set.
These values are case sensitive and must conform to the /bin/
sh variable format.
2 To manually edit the configuration file,
(
/etc/lp/interfaces/<queue name>.conf) add a line
that consists of the parameter and value. For example, to
change the default orientation to Landscape, add the
following line:
orient= “LANDSCAPE”
PRINTING TO THE GL-1010 IN UNIX
LP Command
Use the lp command to send a file to print on the GL-1010. The
lp command allows you to specify various printer specific
options using the
-o option parameter on the command line.
The
lp command also allows you to set other print options using
various other parameters. Use the
man net_gl1010 command
to view the online document that describes the various options
and parameters you can set to configure printed output.
All of the options are sent to the GL-1010 at the start of a print
job, so if the print file contains its own commands, they may
override the
lp options.
