Black Box EncrypTight Appliance Trim Kit User Manual


 
Provisioning Appliances
114 EncrypTight User Guide
Figure 34 Put configurations and reboot appliances
Related topics:
“Importing Remote and Local Interface Addresses” on page 114
“Changing Configuration Import Preferences” on page 115
“Transparent Mode” on page 306
Importing Remote and Local Interface Addresses
For ETEPs, remote and local interface addresses are optional configuration items. They are needed when
operating the ETEP in non-transparent mode.
The standard CSV import format is as follows:
<deviceType>,<softwareVersion>,<appliance name>,<management ip
address>,<management subnet mask>,<management default gateway>
To include remote and local interface data, append the following information to the same line:
,RemoteInterface,<remote ip address>,<remote subnet>[,<remote default
gateway>],end,LocalInterface,<local ip address>,<local subnet mask>[,<local
default gateway>],end
RemoteInterface, LocalInterface and end are keywords. Keywords are case-sensitive and must be
entered exactly as shown in Table 34. If the RemoteInterface keyword is included in the import file, then
you must specify the remote port IP address and subnet mask. If you are not defining a remote default
gateway address, enter 0.0.0.0. The end keyword delineates the end of the attribute list started by the
RemoteInterface keyword. Next, enter the LocalInterface keyword followed by the local port IP address
and subnet mask. If you are not defining a local default gateway address, enter 0.0.0.0. Complete the
statement with the end keyword. Sample import statements are shown in Figure 35.
Table 34 Remote and local keywords and attributes
RemoteInterface Keyword that indicates the beginning of the remote interface definition
remote ip address Remote port IP address in dotted decimal notation
remote subnet Remote port subnet address in dotted decimal notation
remote default gateway Remote port default gateway. If you do not use a default gateway, enter
0.0.0.0.
LocalInterface Keyword that indicates the start of the local interface definition