Filter
Top Products
Getting Started with ETPM
144 EncrypTight User Guide
3 In the Appliance Manager, add and configure ETKMS 1 (File > New Appliance).
In the sample illustrated in Figure 50, ETKMS 1 has the IP address 192.168.1.33 and does not have a
backup ETKMS.
4 In the Appliances view, select ETKMS 1 and click Refresh Status . For more information, see
“Adding ETKMSs” on page 156. This helps you determine that the ETKMS is accessible and
operating properly.
5 Start ETPM. Click the Open Perspective button on the perspective tab and select Other. From the
Open Perspective window, select ETPM and click OK.
6 In the ETPM window, click the Networks tab and add Network A and Network B.
In the sample illustrated in Figure 50, Network A has the IP address 192.168.144.0 and Network B
has the IP address 192.168.154.0. For more information, see “Adding Networks” on page 159.