Filter
Top Products
Modifying the ETKMS Properties File
258 EncrypTight User Guide
Policy Refresh Timing
The policy refresh timing controls the timing between the initiation of a renew keys and policy lifetime
and the deletion of the expired keys. The following entries specify the timing for the policy refresh.
#### Policy refresh timing
# Policy refresh delete delay (1-120 minutes)
minutesAfterRefreshExpireBeforeDelete=30
# Policy refresh buffer for daily refresh (1-120 minutes)
maxBufferMinutesBeforeDailyRefresh=20
PEP Communications Timing
The following parameters define the ETKMS to PEP communications timing.
#### General Communication Timing
# Initial wait (1-1200 Seconds)
initialRetryWaitTime=300
# Retry wait (1-1200 Seconds)
retryWaitTime=300
# Retry count (1-100)
retryCount=1
# Max retry wait (1-1200 Seconds)
maxRetryWaitTime=300
#### PEP Extended Communication Timing
# Initial PEP retry wait (1-1200 Seconds)
initialPEPRetryWaitTime=360
# PEP retry count before starting final wait (1-100)
initialPEPRetryCount=12
# Final PEP retry wait (1-1200 Seconds)
finalPEPRetryWaitTime=600
These entries divide the timing into general communications timing and extended communications
timing.
The general timing defines a group of communication attempts defined by
retryCount. The time
between the first communication attempt and the second is defined by the
initialRetryWaitTime.
The time between the second and third attempt is defined by
maxRetryWaitTime. This continues for n
communications attempts as defined by
retryCount or until maxRetryWaitTime is reached. This
process is repeated as defined by the extended communications parameters.
minutesAfterRefreshExpireBeforeDelete
Specifies in minutes the time the PEP waits after a
Refresh before it deletes the old keys.
maxBufferMinutesBeforeDailyRefresh
Specifies in minutes the earliest time in which a
Refresh is issued.