Filter
Top Products
ETEP Configuration
302 EncrypTight User Guide
Figure 103 ET0100A interfaces configuration
Related topics:
● “Management Port Addressing” on page 302
● “Auto-negotiation - All Ports” on page 305
● “Remote and Local Port Settings” on page 306
● “Transparent Mode” on page 306
● “Trusted Hosts” on page 311
Management Port Addressing
Management of the ETEP is performed out-of-band or in-line through the Ethernet management port. The
ETEP management port must have an assigned IP address in order to be managed remotely and
communicate with other devices. The IP address that you enter in ETEMS must match the IP address in
effect on the appliance’s management port.