Filter
Top Products
Managing IP Networks
160 EncrypTight User Guide
To add a network:
1 From the EncrypTight Components view, click the Networks tab.
The Networks tab lists all of the networks that have been added. You can sort of the list of networks
by IP address or network mask by clicking a column header.
2 Right-click anywhere in the Networks tab and click Add new Element.
3 Create the network in the Network editor as described in Table 41. Enter the IP address and subnet
mask to select the traffic of interest.
Figure 54 Network editor
4Click Save when complete.
TIP
You can use a network mask of 255.255.255.255 to specify an individual address, or host. For example,
you might want to do this for traffic from devices such as a Lotus Notes server that needs to be sent in the
Table 41 Network entries
Field Description
Network IP
Address
IP address for the protected network.
Network Mask Subnet mask for the protected network. Non-contiguous masks are valid on
ETEP PEPs version 1.4 and later.