Filter
Top Products
22
Model PH61Important: To the Operator
To change the date or time, select the SET CLOCK
option in the menu. Touch the UP arrow symbol to
advance the arrow from Exit to Change, then touch
the SEL key to select the Change option.
SET CLOCK
12:01 7/21/2007
Change
>Exit
Change the time by touching the UP arrow with the
cursor under the hour position. Move the cursor to
the minutes position by touching the SEL symbol.
Once the correct minutes are entered, touch the
SEL key to advance the cursor to the month.
SET CLOCK
12
:01 7/21/2007
>Exit
Enter the correct month, day, and year. Then touch
the SEL symbol to advance to the DAYLIGHT
SAVING TIME screen.
DAYLIGHT SAVING TIME
ENABLED
> Enable
Disable
The Daylight Saving feature, when enabled, will
automatically adjust the control clock for daylight
saving time. To disable the Daylight Saving Time
feature, touch the DOWN arrow to move the arrow
to “Disable”. Then touch the SEL key to save the
new setting.
Screen “D” is SYSTEM INFORMATION. The first
screen will indicate the software version used in the
unit.
SOFTWARE VERSION
PH61 Control UVC2
Version 2.00
SEL
Press the SEL key to view the second screen of the
SYSTEM INFORMATION display. This screen will
indicate the Bill of Material number and serial
number for the unit. Press the SEL key once to
return to the Operator Menu.
B.O.M. PH6133R907
S/N K0000000
SEL
Screen “E” is AUTO HEAT TIME. This screen is
used to set the time of day in which the heat
treatment cycle will start. Move the cursor under the
number you wish to change. Press the plus key to
increase the number; press the minus key to
decrease the number. When the desired time
appears, press the SEL key once to return to the
OPERATOR MENU.
AUTO HEAT TIME
TIME: 12:00 AM
- -
<--- ---> +++ - - - SEL