Filter
Top Products
28
Model PH61Operating Procedures
Step 10
Lubricate the smaller end of the driven spinner.
(See Figure 16.)
Figure 16
Step 11
Squeezing the split end together, insert the driven
spinner through the metal opening of the draw valve
until it snaps into place. (See Figure 17.)
Figure 17
Step 12
Lubricate the inside of the freezer door spout, top
and bottom. (See Figure 18.)
Figure 18
Step 13
Insert the draw valve spinner assembly from the
bottom until the slot in the draw valve which accepts
the draw handle comes into view. (See Figure 19.)
Figure 19
Step 14
Install and lubricate the pivot pin o-ring.
(See Figure 20.)
Figure 20