Filter
Top Products
24
Model PH61Important: To the Operator
Screen “H” is the LOCKOUT HISTORY. This screen
displays a history of the last 40 hard locks, soft
locks, and brush clean dates. Page numbers are
indicated in the upper right hand corner. Page 1
always contains the most recent failure. Press the
PUMP key to cycle through the pages.
The second line of the screen displays the date and
time a failure occurs. The third line indicates the
reason for a failure, or will indicate a successful
brush cleaning has occurred. Some failures occur
for multiple reasons. When this occurs, a page will
be generated for each reason. Press the SEL key
once to return to the Operator Menu, or twice to
return to the Main Screen.
LOCKOUT HISTORY 1
7/21/07 02:08
SOFTLOCK ABORT
+++ - - - SEL
Screen “I” is the SERVICE MENU. This screen can
only be accessed by a service technician.
Screen “J” is the STANDBY MODE. To place the
freezer in the STANDBY mode, move the cursor
under the word “yes”. Press the SEL key to execute
the command. Pressing the SEL key again will
return you to the main screen. To exit the STANDBY
mode and place the unit in AUTO, press the AUTO
key once. Pressing the AUTO key again will place
the unit in the OFF mode.
STANDBY MODE
STANDBY YES NO
- - -
<--- ---> SEL