Filter
Top Products
Editing Configurations
EncrypTight User Guide 119
Figure 37 Change Management IP window
Related topics:
● “Changing the Address in ETEMS” on page 119
● “Management Port Addressing” on page 302
● “IPv6 Addressing” on page 304
Changing the Address in ETEMS
If the management IP address has been changed directly on the appliance, you need to update the address
in the ETEMS configuration.
For ETEP 1.6 and later appliances, you can edit the management port IP address directly in the appliance
editor. For other appliance models, use the following procedure.
To update ETEMS with the appliance’s new management IP address:
1 In the Appliance Manager, select an appliance from the Appliances view.
2On the Edit menu, click Management Address. The Change Management IP window opens.
3In the IP Address To field, type the management port IP address.
4In the Subnet Mask To field, confirm the subnet mask and change if necessary.
5In the Default Gateway To field, confirm the default gateway and change if necessary.
6Click Finish. After a few seconds ETEMS displays an “Operation Failed” message (Figure 38).
7Click OK to update ETEMS with the appliance’s new management IP address.