Filter
Top Products
Creating VLAN ID Ranges for Layer 2 Networks
178 EncrypTight User Guide
2 Right-click anywhere in the VLAN Ranges view and then click Add new Element.
3 Create the VLAN range in the editor as described in Table 45.
4Click Save when complete.
NOTE
VLAN ranges are not supported on ETEP PEPs. If you enter a range, the ETEP uses only the lower VLAN
ID. We recommend entering the same value for the upper and lower VLAN ID when working with ETEP
PEPs.
Figure 66 VLAN range editor
Table 45 VLAN ID range entries
Field Description
Lower VLAN ID Enter the lower range limit in the range 1 to 4094.
Upper VLAN ID Enter the upper range limit in the range 1 to 4094.
Name Enter a unique name to identify this particular VLAN Range.
Names can be 1 - 40 characters in length. Alphanumeric characters
and spaces are valid. The special characters <, >, &, ,“ *, ?, /, \, : and |
cannot be used. Names are not case sensitive.