Filter
Top Products
Provisioning Appliances
98 EncrypTight User Guide
3 Optionally, for ETEP appliances with software version 1.6 and later, click Put Throughput License
to install a license as part of the operation. You can also install a license separately from the Put
Configuration operation. To learn more about licenses and throughput speeds, see “Managing
Licenses” on page 56.
4 In the Put Configurations window, click Put to push configurations, and policies if applicable. The
results are shown in the Result column. Common results are shown in Table 27.
5Click Close to return to the Appliances view, and then refresh the appliance status (Tools > Refresh
Status). If you chose to reboot the appliances after loading the configurations, wait a few minutes for
the reboot operation to complete before refreshing the status.
Related topics:
● “Viewing Appliance Status” on page 98
● “Comparing Configurations” on page 100
Viewing Appliance Status
The Appliance Manager lists the appliances that ETEMS is managing. It shows information about each
appliance, such as its operational status, IP addresses, product family and software version, and date and
time. See Table 29 for a description of these fields.
Table 27 Put configuration status
Result Description
Pending The appliance is selected, but the configuration has not yet been
pushed.
OK The configuration was successfully pushed to the appliance.
Operation failed: [reason] A problem was encountered during the put operation. ETEMS provides
a brief description of the reason for the failure.
Reboot Needed Some configuration items require a reboot to take effect.