Filter
Top Products
Creating a Policy: An Overview
EncrypTight User Guide 143
To create a policy:
1 In the ETEMS Appliance Manager, add PEP A and PEP B (File > New Appliance).
In the sample illustrated in Figure 50, the management port of PEP A has the IP address
192.168.11.69 and the management port of PEP B has the IP address 192.168.11.224.
To use an appliance as an EncrypTight PEP, you need to click the Enable EncrypTight setting on the
Features tab of the New Appliance editor. Other settings are also strongly recommended, as discussed
in “Adding a New PEP in ETEMS” on page 148.
NOTE
Although you can create networks and other elements in ETPM, no ETPM data is saved until you add
at least one PEP in the ETEMS Appliance Manager.
2 In the Appliance Manager, select PEP A and PEP B and push the configurations to the PEPs (Tools >
Put Configurations). A reboot is not required for ETEP PEPs.