Filter
Top Products
Holiday Scheduling (
Figure 24
)
The time schedules may be configured for special operation during a holiday period. When
modifying a time period, the ‘‘H’’ at the end of the days of the week field signifies that the period
is applicable to a holiday. (See Figure 24.)
The Broadcast function must be activated for the holidays configured in the Holidef tables to
work properly. Access the Brodefs table in the Equipment Configuration table and answer
‘‘Yes’’ to the activated function. However, when the machine is connected to a CCN Network,
only one machine or CCN device can be configured to be the broadcast device. The controller
that is configured to be the broadcaster is the device responsible for transmitting holiday, time,
and daylight-savings dates throughout the network.
To view or change the holiday periods for up to 18 different holidays, perform the following
operation:
1.
At the Menu screen, press SERVICE to access the Service menu.
STATUS SCHEDULE SETPOINT SERVICE