Filter
Top Products
Note: Refer to weights specified on certified drawing to determine proper lifting equipment
required for specific components or assemblies.
Open-Drive Motor Storage
If the machine is to be placed in extended shutdown, certain precautions must be taken to
provide proper protection while the motor is being stored. The motor should be stored under
cover in a clean, dry location and should be protected from rapid temperature changes.
Since moisture can be very detrimental to electrical components, the motor temperature
should be maintained at approximately 5° F (3° C) above the dew point temperature by
providing either external or internal heat. If the motor is equipped with space heaters, they
CAUTION
CAUTION
!
Uneven lifting must always be avoided. When single point lifting is to be used,
slings of equal lengths must always be used to avoid uneven lifting.
CAUTION
CAUTION
!
Under no circumstances should the motor be lifted using the shaft as an attach-
ment point.