Filter
Top Products
Model 500/600
2-1. INTRODUCTION
This section provides the installation instructions for the electric and
gas models of Henny Penny Pressure Fryers.
Installation of this unit should be performed only by a qualified
service technician.
Do not puncture the fryer with any objects such as drills or
screws as electrical shock or component damage could result.
2-2. UNPACKING
INSTRUCTIONS
The fryer is shipped bolted to a wooden base and covered
with a cardboard container. Both gas and electric models
are shipped completely assembled. If ordered, optional
casters are packaged and shipped separately.
1. Cut the band from around the bottom of the carton.
Any shipping damage should be noted in the presence of the
delivery agent and signed prior to his or her departure.
2. Lift the carton from the fryer.
3. Open the lid of the fryer and remove the basket plus
all accessories.
4. Lay the fryer on its side, resting it in supports.
Take care when moving the fryer to prevent personal injury.
The fryer weighs approximately 300 lbs. (136 kgs).
1207 2-1
Step 2
Step 4
SECTION 2. INSTALLATION