Filter
Top Products
Model 500/600
pilot orifice a controlled opening for the pilot light located on the burner assembly
(gas fryers only)
pilot light a small flame that remains burning even when the fryer is not in use; the flame
(gas fryers only) ignites the gas when the fryer is turned on
power/pump switch a three-way switch located on the front control panel of the fryer that serves as an off/on
switch and a filter switch
pressure gauge the gauge located on the left rear corner of the frypot that shows the pressure inside the
frypot
pressure pad a piece of plastic on eight head fryers located between the lid locking arm and the lid
casting that helps create the seal for the lid; only a service technician should perform
maintenance or repair on the pressure pad
product a food item cooked in the fryer
ready the starting, preset cooking temperature, at which product is placed in the shortening
safety relief valve a spring-loaded valve that automatically releases excess pressure if the operating valve
becomes obstructed; if the safety relief valve activates, turn the Power/Pump switch to
OFF to release all pressure from the frypot
setpoint a preset cooking temperature; the setpoint is a programmable feature
shipping spacer a spacer located in the deadweight assembly for protection during shipment
shortening mixing system an automatic system on eight head fryers that periodically uses the filter pump to mix the
shortening in the frypot to prevent an accumulation of moisture to minimize the boiling
action in the frypot
sift breading the process of removing clumps from breading
solenoid valve a valve used to generate or release pressure for the cook cycle
spark igniters the igniters that create a spark to ignite the pilot lights on eight head gas fryers
(gas fryers only) (see ignition modules)
standpipe the pipe through which oil is pumped back into the frypot after the filtering process is
complete
standpipe assembly the pipe and fittings that are part of the shortening filtering process
straight brush a brush that is included with the fryer that is used to clear the drain in the bottom of the
frypot
temperature probe a round probe that is located in the inside of the frypot that measures the temperature of
the oil in the frypot; the probe communicates with the control panel
203 G-4