Filter
Top Products
Administrative Tasks
P-4 Preface 601354 Rev A
Chapter 6: Troubleshoot — Troubleshooting tips for VolServ
software problems.
Conventions
The conventions used throughout the VolServ technical books
are listed below:
Convention Example
Screen text, file names, program names, and
commands are in Courier font.
Request to add a new volume:
Volume group will be “20”
Volume position will be “A123”.
The root prompt is shown as a number
symbol.
# su root
What you should type in is shown in Courier
bold font.
vsarchiveqry
Site-specific variables are in a Times italics
font.
tar -xvf tapedevicename
A backward slash ( \ ) denotes the input is
continued onto the next line; the printed page
is just not wide enough to accommodate the
line.
#
remsh nodename -n dd if=/dev \
/tapedevicename/bs=20b | tar xvfb \
- 20
(You should type the entire command without
the backward slash.)
Pressing <Return> after each command is
assumed.
A menu name with an arrow refers to a
sequence of menus.
Config-->MediaType-->Redefine