Filter
Top Products
Administrative Tasks
601354 Rev A Troubleshoot 6-9
Troubleshoot
Initialization/
Configuration
Note
The cleanconfig utility can be run for an archive
configure/reconfigure process that has terminated abnormally.
Problem Solution
Clear
Configuration in
Progress Flags
During reconfiguration,
configuration in progress
flags are received even
though none is actually
configuring. How can
these flags be cleared?
To clear the Configuration in Progress
flags, run the cleanconfig script in the
$VS DIR/utilities directory. When the
message Are you sure you want to do
this? is displayed, enter y. All of the
Configuration in Progress flags are
cleared.
Initialize vswin
Software
Why is the vswin software
not always able to initialize
on a remote terminal?
The vswin software does not initialize if
executed without running the xhost
command. This command enables the
remote computer to act as host for the
local workstation.
To initialize the vswin software, perform
the following procedure:
Step 1: Change to the $
VS DIR/logs
directory. Check the
vslogfile file for
clues.
Step 2: Enable access to the remote host.
Login to the local workstation. Issue the
xhost remote_host_name command.
Step 3: Set the environment DISPLAY
variable to ensure that the vswin software
appears to initialize when executed on a
remote host. Login to the remote host
computer. Issue the setenv DISPLAY
local_workstation_name:0 command.