Filter
Top Products
Administrative Tasks
3-34 Initial Configuration 601354 Rev A
Entries have the form d#t#l0 for the SCSI drives. The first #
indicates the element address of the drive in the library and the
second # indicates the SCSI target id of the drive.
Entries match the drive names that are configured for the Scalar
DLC drives, for example, PDR256.
When the CLM/Drive Slot entry is made, only those drive slots
that interface to installed drives and are not associated are
available for selection.
After a drive is associated with an archive, its parameters
cannot be changed. It must be disassociated and associated
again to change any parameter. Drive parameters can be viewed
using the Query Drive command.
Define a Label
Pattern
The Import Media command has an option that allows barcode
labels to be printed. Using previously-defined label patterns
allow generation of unique, sequential media identifiers to be
used during import and also to be directed to a barcode label
printer.
VolServ software acquires label pattern information only via
the GUI Define Label Pattern window. Basic parameters
consist of label pattern name and label pattern definition. After
a label pattern is defined, its cannot be changed. It must be
deleted and defined again.
Label patterns can be defined at any time that VolServ is
running. However, a label pattern must be unique and must be
defined before printing a label with that particular pattern.