Filter
Top Products
2. ClickShare Specifications
1 2 3 4 5 6 7 8 9 10 1
Image 2-4
Backside of the B ase Unit
1
Fixture points for the antenna
2
Label containing the article number and power rating of the product
3 Mains power connector
4Rockerswitch
5 DVI-I display connector
6 DisplayPort connector
7 LAN Ethernet connection
8
4 USB ports
9 Audio In port
10
Audio Out port
Rocker switch
The rocker switch is used to power on and off the Base Unit.
• ToswitchontheBaseUnit,settherockerswitchto“I”.
• To shut down the system, set the rocker switch to “0”.
Mechanical fixture points
The mechanical fixture points are located at the bottom of the Base Unit
Antenna
Two antennas are included in the Click
Share box. To av oid dam age during transport, they are not pre-mounted. Depending on the
installation method you should secure the antenna to the ba ck of the B ase Unit or to the front panel of the rack mount.
The antennas can rotate for a better wireless connection.
Ventilation grids
Ventilation grids are foreseen on the top and both sides of the Base Unit.
10
R5900004 CLICKSHARE 28/03/2013