Filter
Top Products
4. ClickShare installation
4. CLICKSHARE INSTALLATION
About this chapter
The installation chapter gives an overview of the different ways to install the bas e unit of ClickShare, the poss ible connec tions and
the use of ClickShare Link for an iPad co nnection.
Overview
• Installatio n methods for the Base unit
• Table mounting
• Wa ll mounting
• Ceiling mounting
• Rack mounting
• Video signal connections to the Base Unit
• Audio connection
• LAN connection
• Power connection and switching on
• Connecting an iPad
WARNING: D o not connect to the mains power during installation.
WARNING: Make sure the mains power is within range of the users at all times!
CAUTION: Mounting the Base Unit under a random angle is not allowed. It should be mounted horizontal or
vertical acco rding to the installation instructions.
WARNING: Only use the antennas that are delivered with the product. Other antenna are not allowed.
WARNING: Use power cord which complies to local regulations. If not included in the box, contact your local
dealer for a correct p ow er cord.
4.1 Installation methods for the Base unit
For optimal performance, install t he Base U nit close to the display and avo id obstacles between the Base Unit
and t he Buttons. Do not block the fan inlets an d outlets o f the Base Unit!
Introduction to the installation methods
The base unit can be installed in different w ays in a meeting room:
• Table mounted
• Wa ll mounted
• Ceiling mounted
• Rack mounted
The antennas are removable. They can be fixed to the Base U nit depending on the way the Bas e Unit is installed in the room. T he
antennas can rotate for better w ireless connection.
R5900004 CLICKSHARE 28/03/2013
17