Filter
Top Products
6. Web Interface
6.20 Load Default Settings
About default settings
The ClickShare Base Unit can return to the factory default settings.
The following s ettings are the defaults:
• Meeting room identification info is cleared.
• Language is set to English.
• Custom wallpapers are removed and the default wallpaper is restored.
• Display resolution is set to auto and standby timer is reset to infinity
• Wa llpaper messages are restored.
• Hostname and S SID is set to clickshare-serialnum ber.
• The SSID is broadcasted
• WiFi password is reset to clickshare.
• The default WiFi channel is set back to frequency 2.4 GHz, channel 6.
• The update history is cleared.
• The table with the associated Buttons is cleared.
• The admin password is reset to admin.
• Debug lo gging and remote logging are disabled.
How to select
1. Login to the ClickShare web interface.
2. Click the Maintenance tab (1) an d then click Configuration (2)..
Image 6-33
Factory defaults
3. Click on Load Default Settings to return to the factory defaults ( 3).
Alternative way to load default settings
1. With the Base unit switched off, connect an USB keyboard to an USB port at the back side the Bas e unit.
2. Press the down key on the key board will starting up the Base unit.
R5900004 CLICKSHARE 28/03/2013
59