Filter
Top Products
Using the System Utilities
Using the EISA Configuration Utility
5-16 NCR S10XL Hot Plug Server User Guide
13.
After entering the appropriate selection in the size
field, press [Enter]. You are returned to the system
baseboard configuration screen.
14.
System memory is now correctly configured. Exit
from the EISA Configuration Utility. Make sure to
save the system configuration.
To configure an ISA option without a CFG file, follow
these steps:
1.
Run the EISA Configuration Utility.
2.
If you have a printer, print the resources used by the
entire system by choosing System, then Print.
If you do not have a printer, select View, then
Resources, and write down the resources used by
the system.
3.
Set the appropriate jumpers or switches on the ISA
board. make sure that the board does not conflict
with the system resources currently in use.
If the system uses resources needed by an ISA option,
you have to release those resources and reallocate other
resources to the system.
To avoid resource conflicts, follow these steps:
1.
Specify other resources by selecting Edit, then
Change Resource or Change Function.
Configuring an ISA
Option Without a CFG
File
Avoiding Resource
Conflicts